An oxygen generator is a type of machine for producing oxygen. Its principle is to use air separation technology to first compress the air with a high density, and then use the difference in the condensation point of each component in the air to make it gas-liquid at a certain temperature Separated, and then obtained by further rectification.
Adopting the adsorption performance of molecular sieve, through physical principles, with a large displacement oil-free compressor as the power, the nitrogen and oxygen in the air are separated, and finally a high concentration of oxygen is obtained. This type of oxygen generator produces oxygen quickly and has a high oxygen concentration, which is suitable for oxygen therapy and oxygen health care for all kinds of people.
Operation method:
1. Install the main engine in rotation on the floor or hang it on the wall with a pylon, and install a gas filter;
2. Nail the oxygen supply gusset on the wall or support as needed, and then hang the oxygen supply;
3. Connect the oxygen supply port with the oxygen supply tube, and connect the 12V power line of the oxygen supply to the 12V power line of the host. If multiple oxygen supplies are connected in series, you only need to add a three-way joint and fix the pipeline with a wire buckle;
4. Plug the 220V power cord of the host into the wall socket, and the red light of the oxygen supply will be on;
5. Please add pure water to the designated position in the humidifying cup. Then install it on the oxygen outlet of the oxygen supply;
6. Put the oxygen delivery tube on the oxygen outlet of the humidification cup;
7. Press the oxygen supply start button, the green indicator light will be on, and the oxygen generator will start to work;
8. According to the doctor's advice, adjust the flow to the desired position;
9. Hook up the nasal cannula or wear the mask to inhale oxygen according to the packaging instructions of the oxygen mask or nasal suction tube.
